防静电白色热控涂层的空间环境性能试验

通过在氧化锌晶格中掺入重金属离子，得到具有防静电功能的白色颜料，再以丙烯酸树脂为粘合剂制备出空间飞行器外表面用的ACR－1防静电白色热控涂层；研究了空间环境效应（包括紫外辐照，电子和质子辐照）对该热控涂层太阳吸收率的影响并与有机硅白色热控涂层进行了比较，地面模拟空间环境试验研究结果证明，ACR－1防静电白色热控涂层具有良好的空间稳定性。     

多层隔热材料的性能研究

本文从多层隔热材料的实际应用条件出发,研究了它们在几种层密度下的隔热性能,特别包括了在层密度较高情况下的性能。为了改善多层隔热材料的隔热性能,采用了间隔几层隔离层的组合形式。压缩负荷对层密度、隔热性能的影响也进行了初步的研究。     

喷管扩张段烧蚀的“台阶效应”计算

当喉衬和扩张段内衬采用具有不同烧蚀率的材料时,常出现“台阶效应”.本文以气动热化学烧蚀机理为基楚,提出应用适当的对流换热和加剧的化学反应计算对台阶效应区进行修正的方法,使台阶效应区的烧蚀率预示更切合实际工况.     

Numerical simulations of water spray on flame deflector during the four-engine rocket launching

This paper aims to study on the cooling effect with two types of water spray nozzle on the flame deflector during the four-engine launch vehicle take-off. To accurately simulate the two-phase flow of the rocket gas with multispecies and the water spray, the three-dimensional compressible Navier-Stokes equations, discrete ordinates methods and realizable k-Ɛ turbulence model are used to establish the rocket supersonic plumes impact model. The Eulerian dispersed phase (EDP) model was used to simulate the water spray into the exhaust gas. The accuracy and effectiveness of the gas-liquid flow model are verified by a good agreement between simulation results and experimental data. On this basis, a series of numerical simulation studies under different water injection position are performed. The results show that the high temperature regions, along the axis of engines on the deflector plate, have no significant temperature decreasing effect by water spray from the nozzles mounted on the apex of the deflector, and the high temperature converts a large quantity of water into vapor near the plume boundary, which would decrease the flow conductivity. With the cooling spray nozzle fixed directly to the deflector plate, the temperature decrease effect is obvious and the effect of thermal shock on deflector plate induced by exhaust plume is reduced, so that it can prevent the flame deflector from thermal ablation. The study results provide indepth information and engineering guidance for designing the water spray systems and increasing the safety of the launch process.     

硅橡胶/双酚A-苯胺型苯并噁嗪树脂耐烧蚀复合材料的制备与烧蚀结构的研究

苯并噁嗪树脂具有优异的成炭和抗高温氧化性能,是新一代的耐烧蚀树脂。以双酚A-苯胺型苯并噁嗪树脂为耐烧蚀树脂,采用1H-NMR、DSC和转矩流变仪研究其成环率和加工性能;以硅橡胶为耐烧蚀基体,采用熔融共混方法制备了硅橡胶苯并噁嗪树脂耐烧蚀复合材料。进行力学和氧乙炔焰烧蚀检测,利用FT-IR、Raman和SEM研究复合材料综合性能和烧蚀结构。结果表明:苯并噁嗪树脂能够明显提高硅橡胶复合材料的耐烧蚀性能,当树脂添加量为20份时,复合材料具有较好的耐烧蚀和力学性能;该复合材料经过氧乙炔焰烧蚀后,烧蚀层形成表面陶瓷层、裂解炭化层和基体层。表面陶瓷层主要由SiO_2,SiC和C组成,裂解炭化层的主要组由C,SiO_2,SiC以及炭化彻底的碳和炭化不完全的有机结构组成。     

Prediction of shock-layer ultraviolet radiation for hypersonic vehicles in near space

A systemic and validated model was developed to predict ultraviolet spectra features from the shock layer of near-space hypersonic vehicles in the ‘‘solar blind" band region. Computational procedures were performed with 7-species thermal non-equilibrium fluid mechanics, finite rate chemistry, and radiation calculations. The thermal non-equilibrium flow field was calculated with a two-temperature model by the finite volume technique and verified against the bow-shock ultra-violet(BSUV) flight experiments. The absorption coefficient of the mixture gases was evaluated with a line-by-line method and validated through laboratory shock tube measurements. Using the line of sight(LOS) method, radiation was calculated from three BSUV flights at altitudes of 38,53.5 and 71 km. The investigation focused on the level and structure of ultraviolet spectra radiated from a NO band system in wavelengths of 200–400 nm. Results predicted by the current model show qualitative spatial agreement with the measured data. At a velocity of 3.5 km/s(about Mach11), the peak absolute intensity at an altitude of 38 km is two orders of magnitude higher than that at 53.5 km. Under the same flight conditions, the spectra structures have quite a similar distribution at different viewing angles. The present computational model performs well in the prediction of the ultraviolet spectra emitted from the shock layer and will contribute to the investigation and analysis of radiative features of hypersonic vehicles in near space.     

A time-frequency analysis of the thermal radiation background anomalies caused by large earthquakes: A case study of the Wenchuan 8.0 earthquake

Strong earthquakes have an impact on the regional thermal radiation background, which has been both observed and confirmed. This effect produces anomalies in the thermal radiation background (TRBA) and increases the difficulty of extracting a thermal radiation anomaly (TRA) that is associated with an earthquake occurring during the same time period. The extraction and identification of such anomalies has been ignored by previous studies. In this study, we investigate the time-frequency analysis (TFA) method, together with the wavelet filtering of the Daubechies method and the relative power spectrum analysis of the Fourier Welch method to extract and analyse the TRBA caused by the 2008 Wenchuan Ms 8.0 earthquake and the TRA of the 2013 Minxian-Zhangxian Ms 6.6 earthquake using data concerning the brightness temperature of a black body (TBB) from the Fengyun-2 series of geostationary meteorological satellites developed by China. The result showed that this method can effectively extract and analyse the TRBA caused by the Wenchuan earthquake and the TRA of the Minxian-Zhangxian earthquake form a complex background environment. Furthermore, we discussed the impact of the earthquake on the TRBA and segmented the process. The impact is mainly reflected by three aspects; the characteristic period of the TRBA changes, the TRBA occurs at the same time every year, which is identical to the time at which the earthquake anomaly occurred, and the impact process is in stages. We also summarized the correlation between the characteristic parameters of a TRA and the regional thermal radiation background, geography, and climatic factors.     

高空飞行环境中液体运载火箭底部热环境研究

采用数值模拟和飞行测试验证相结合的方法对液体运载火箭高空对流/辐射耦合换热问题开展系统深入研究。基于燃气多组分输运Navier-Stokes方程、热辐射方程、Realizable k-ε两方程湍流模型，建立了高空含自由流的运载火箭燃气喷流流动模型。辐射模型采用离散坐标法(DOM)，空间离散采用二阶迎风TVD格式，对多个典型飞行高度火箭底部热流进行大型并行计算，将数值结果与试验数据进行广泛对比，验证了计算模型的精度和有效性。数值研究表明，火箭底部辐射热流在刚起飞阶段达到最大值，随着飞行高度上升，辐射热流逐渐降低，火箭底部对流热流表现为先升高后降低的趋势，并在20 km高空达到峰值。本文的预测分析方法对液体运载火箭底部热防护设计具有重要的理论意义和工程应用价值。     

高性能纤维增强树脂基复合材料3D打印及其应用探索

纤维增强树脂基复合材料具有优异的力学性能,能够实现轻质、高性能结构的制造,但传统的成型工艺过程复杂、成本高,难以实现纤维回收利用,限制了纤维增强树脂基复合材料的广泛应用.3D打印技术是一种新兴的零件成形工艺,将3D打印技术应用于纤维增强树脂基复合材料的制造,为实现复合材料低成本、绿色制造提供了可能性.综述了纤维增强树脂基复合材料3D打印技术研究的发展现状,提出了一种高性能连续纤维增强热塑性复合材料3D打印工艺及其回收再制造策略.